Shopping Bag0 item(s) in cart/ Total: $0
Warn Winch Model M12000 W R.F. 125' - 3 8"  17801

Warn Winch Model M12000 W R.F. 125' - 3 8" 17801

review
4
0
5
Your Price: $1,599.00
Contact Us
Part Number:17801

Choose Options

Winch Mount
Add Heavy Duty Winch Mount [+$100.00]
Add Warn Winch [+$479.99]
A RELIABLE WORKHORSE TO MEET HEAVY WINCHING NEEDS
For heavy-duty winching needs, this winch is a champion workhorse. Big torque, power and quick no-load retrieval speed is 30 feet per minute. Its design is low profile, so it'll fit where you want. And it's powered by the 4.6-hp Series Wound motor and our proven three-stage planetary gear train. With 125 ft. of 3/8" wire rope, the M12000 can solve most any pulling problem.

M12000 SPECS/PART NUMBERS
Rated Line Pull: 12,000 lbs. (5440 kgs) single-line
Intended Use/Application: Vehicle Recovery / For Heavier Trucks and SUVs
Motor: 12v 4.6hp - 24v 2.5hp Series Wound
Duty Cycle Rating: 
Remote Control: Remote, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 261:1
Lubrication: Aeroshell # 17
Clutch (freespooling): Rotating Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 3.5"/8.2" (9cm/21cm)
Weight: 136lbs. (62kgs.)
Wire Rope: 125', 3/8"diameter (38m, 9.5mm diam)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 30(9.14) 67 amps 1/1200(5443)
2000(910) 14(4.27) 140 amps 2/11120(5044)
4000(1810) 8.62(2.63) 210 amps 3/10340(4690)
6000(2720) 6.92(2.11) 250 amps 4/9770(4432)
8000(3630) 5.80(1.77) 320 amps 5/9250(4196)
10000(4540) 4.39(1.34) 370 amps
12000(5440) 3.86(1.18) 440 amps

24V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 31.94(9.57) 24 amps 1/12000(5443)
2000(910) 11.7(3.57) 105 amps 2/11120(5044)
4000(1810) 9.5(2.90) 129 amps 3/10340(4690)
6000(2720) 8.5(2.59) 152 amps 4/9770(4432)
8000(3630) 7.5(2.29) 175 amps 5/9250(4196)
10000(4540) 6.5(1.98) 198 amps
12000(5440) 6.0(1.83) 221 amps
 
Above performance specs are based on first layer of drum
4 Stars
Owner
I am very pleased with my winch, however, I was disappointed that even knowing exactly which bumper on which the winch was to be installed, I did not have correct installation procedure. With the Ranch Hand Bumper on my RAM 2500, I had to (after having already installed the winch), remove the winch and stand it on end and remove the eight screws holding the left side housing and rotate the hub ninety degrees to allow the engage handle to be on the top of the winch instead of the front. There was insufficient room to operate the switch. Additional, the factory install location for the contactor bracket is on the back of the winch, which put it right into the radiator. I drilled a couple of holes in the top of the bumper and mounted the bracket and contactor box at that location. All those install issues aside, the winch works great. I just wish there was some simple method of having it level wind instead of bunching up the cable.
Did you find this helpful? 
Reviewed by:  from White Springs, Florida. on 8/23/2016
4

Related Items

Recently Viewed Items